Zombieslider's build .

Post pics of your Infiniti M30s or Nissan Leopards. ALL Z31 and R31 owners, please post your cars at the section below.
zombieslider
F31Club Noob
Posts: 83
Joined: Fri Jul 16, 2010 8:55 pm

Zombieslider's build .

Post by zombieslider » Sun Jan 23, 2011 8:44 pm

Hi I'm Brian Klatt http://s110.photobucket.com/user/sr20dr ... 1.jpg.html

Got the car in july(i think) it was a journey but def not the strangest experience ive had picking up a car from out of state. Anyways got a great deal $600 already 5lug swapped and running.
1.jpg
i had fried the ecu in my 240 and was looking for another car just happened to have some stance gr+ pro ssd coilovers on it that werent being used and isis tension rods those went on within the week of getting the car.
2.jpg

next on the list was proceeding to test fit all my friends wheels since this car was kind of an impulse buy and i didnt have much money.

17x9 0offset cragar's
3.jpg
16x8 close to 0 offset american racing
4.jpg
rare jdm wheels that i forget the name of 17x8 and 17x9 +30 somethings
5.jpg
zombieslider
F31Club Noob
Posts: 83
Joined: Fri Jul 16, 2010 8:55 pm

Re: Zombieslider's build

Post by zombieslider » Mon Jan 24, 2011 8:15 am

my friend had an s13 megan racing strut bar laying around so i borrowed it indefinately
engine.jpg

picked up some jdm s13 turn signals and removed the infiniti badge(whooo! hahaha)
turn.jpg


and then i finally got my own set of wheels, cobra reps 17x10.5 -2(f) +3(r) or something like that
side.jpg
side2.jpg
wall.jpg
zombieslider
F31Club Noob
Posts: 83
Joined: Fri Jul 16, 2010 8:55 pm

Re: Zombieslider's build

Post by zombieslider » Mon Jan 24, 2011 8:33 pm

so my best friend was going through the junkyard as he often does and picked me up a volvo 740 lip, with some slight modifications it fit amazingly
lip.jpg
lip2.jpg
lip3.jpg
zombieslider
F31Club Noob
Posts: 83
Joined: Fri Jul 16, 2010 8:55 pm

Re: Zombieslider's build

Post by zombieslider » Mon Jan 24, 2011 8:35 pm

p.s. that civic in the 2nd pic on the right of my car is on bags and i was lower!!!!!
zombieslider
F31Club Noob
Posts: 83
Joined: Fri Jul 16, 2010 8:55 pm

Re: Zombieslider's build

Post by zombieslider » Tue Jan 25, 2011 12:35 pm

top priorities were met by finally getting the 5spd done so the drifting could commense, also welded an s13 diff and stiffened up my diff mount.

i had the front half of some vg powered cars drive shaft(im thinking an s12 havent been able to confirm it yet though) and purchased an isis short shifter, lever extender, ss clutch line and a vertex shift knob.
shifter.jpg
the pedals are super goofy kinda messed up the brake pedal by bending it but ended up fixing it, sits a lil close to the clutch pedal but doesnt bother me i have small feet.
pedals.jpg

I also threw in my s13 dmax floor matts for some extra flare
floormat.jpg
zombieslider
F31Club Noob
Posts: 83
Joined: Fri Jul 16, 2010 8:55 pm

Re: Zombieslider's build

Post by zombieslider » Wed Jan 26, 2011 8:41 pm

being super skinny didnt work out to well in the stock seats while drifting so i got some brides and my friends gf painted the backs of them. Had to fab up some rails for them.
m30seat.jpg
P1020302.jpg
mounted the passenger seat extra low and super far back its awesome short ppl cant even see the front of the car
rolling.jpg

then i traded my friend some parts for his chaser aero hood vent
P1020311.jpg
zombieslider
F31Club Noob
Posts: 83
Joined: Fri Jul 16, 2010 8:55 pm

Re: Zombieslider's build

Post by zombieslider » Wed Jan 26, 2011 8:47 pm

last thing to go on the car was a keys racing wheel, i have a problem with buying way to expensive interior car parts lol.
P1020348.jpg
P1020351.jpg
cltcmmder17
F31Club Grasshopper
Posts: 107
Joined: Sun Mar 14, 2010 3:48 pm
Location: Centralia, Washington

Re: Zombieslider's build

Post by cltcmmder17 » Thu Jan 27, 2011 12:54 pm

Im diggin the car for sure. Thinkin I might have to steal the lip idea.
1988 300ZX Sold after 4 years =(
1990 M30 Coilovers installed
1988 Mazda B5700 (B2200 with chevy small block)
zombieslider
F31Club Noob
Posts: 83
Joined: Fri Jul 16, 2010 8:55 pm

Re: Zombieslider's build

Post by zombieslider » Thu Jan 27, 2011 4:17 pm

good its pretty cheap, it was $13. I had to cut about 2 inches out of the middle(width wise) of it and about 2 inches off the top but im slammed if your a lil bit higher you wont have to take so much off the top.
User avatar
Driftur
F31Club Contributor
Posts: 263
Joined: Fri Aug 18, 2006 3:52 am
Location: Oahu

Re: Zombieslider's build

Post by Driftur » Thu Jan 27, 2011 4:54 pm

thats sikkness, great progress! you must not be able to pull into any driveways or change lanes without whacking all the manapua's
Jay: In a world gone mad, we will not spank the monkey, but the monkey will spank us.
zombieslider
F31Club Noob
Posts: 83
Joined: Fri Jul 16, 2010 8:55 pm

Re: Zombieslider's build

Post by zombieslider » Thu Jan 27, 2011 9:36 pm

i can pull into some drive ways but not mine :( we have a huge speed bump so all the water from the neighborhood doesnt flood down it.

This is pretty much up to date as the car sits
Plans for the near future: delete abs and add hydraulic ebrake

plans to be done soon hopefully: finish building my ca18det and swap it in

ca18det build
all gaskets replaced, greddy timing belt, sr20 ACT clutch and light weight flywheel, fresh water pump, fresh oil pump, oil filter relocation, sr20 ss turbo lines, jjspec racing turbo manifold, ebay turbo elbo and 3inch down pipe, gt2871rs, 550cc injectors, n60 maf, nistune, bee*r rev limiter, nismo motor mounts, tomei fuel pressure regulator, gizzmo electronic boost controller.

Just a lil preview of the motor before i put it in my 240sx awhile ago
P1020036.jpg
P1020050.jpg
SLYDRDIE1
F31Club Noob
Posts: 52
Joined: Mon Aug 11, 2008 12:49 pm

Re: Zombieslider's build

Post by SLYDRDIE1 » Fri Jan 28, 2011 8:45 pm

the 740 lip was only $13.where a junkyard or aftermarket?
zombieslider
F31Club Noob
Posts: 83
Joined: Fri Jul 16, 2010 8:55 pm

Re: Zombieslider's build

Post by zombieslider » Sat Jan 29, 2011 11:52 am

it was at a junkyard
User avatar
Mr. 25/8
F31Club OG
Posts: 502
Joined: Mon Jul 09, 2007 2:38 pm
Location: Austin, TX

Re: Zombieslider's build

Post by Mr. 25/8 » Sat Jan 29, 2011 9:06 pm

I thought it was off an 850?
zombieslider
F31Club Noob
Posts: 83
Joined: Fri Jul 16, 2010 8:55 pm

Re: Zombieslider's build

Post by zombieslider » Sat Jan 29, 2011 9:55 pm

oh ya thats right, although i think the 740 would prolly be about the same.
Post Reply