Agreed. Really like the lights..

Well even over small bumps the rear goes flying up in the air when I'm going kinda fast, I guess preloading them should work. I'll give it a try. I don't want to roll the fenders because, well frankly I don't know how, and am afraid I'll chip the paint. :( Small chance I'll be in the LA area with th...

0 preload. Would you recommend it, and if so, how much?

And here are some of how it sits now. Mods, sorry for all the posts, I tried doing it all in one post but the text editor screws up and doesn't let me see what I'm typing once I get to a certain level of words... http://img641.imageshack.us/img641/818/picture007mediumq.jpg http://img98.imageshack.us...

I'm a picture guy, so here are pics of everything. All taken with an iPhone 4: Bm-57s http://img830.imageshack.us/img830/1129/picture029medium.jpg 8ks left, 10ks right http://img153.imageshack.us/img153/5668/picture033medium.jpg Changing out the springs, you can see the leak of brake fluid. http://i...

A small review on the Parts by Max s13 Suspension. I have tried the following combinations: Front/Back: 10k/8k: Very stiff, car moves with any bump on the road, I'd say pretty uncomfortable for city driving, but has the best handling of all. 8k/6k: Somewhat softer ride, but suspension travels too mu...

I went thru 2 (two), yes count them ladies and gentlemen, 2 leaky bm-57's. WTF is this?? First I overpay for one on ebay, $150. Get it, and it is leaking where the bmc meets the booster, guessing bad seals? Well then I order another from O'reillys for $70, turns out it was leaking too. Keep in mind,...

One other observation which I noticed when I flushed my brake system. Did you check the vaccum line from the booster to the intake manifold? Make sure that the check valve in that line is working properly. Also, the whole line should be clear of any obstructions. My check valve was alright, but a p...

mmmjesse wrote:

Mr. 25/8 wrote:

CLASSIC F31 wrote: If you kept the ABS system, that has to bled as well.

BTW Great progress.

Thanks. I didn't keep the ABS. I guess I'll re-bleed the whole system again.

So you completely removed the abs pump and all?

No sir. Its still there. I bled that too.

CLASSIC F31 wrote: If you kept the ABS system, that has to bled as well.

BTW Great progress.

Thanks. I didn't keep the ABS. I guess I'll re-bleed the whole system again.

Oh and I picked up this little beast, couldn't resist. Intel i7, 4gb ram, 1gb nvidia 335 GT, OCZ vertex 2 ssd...and 7+ hr battery life. Best of both worlds.

Well, Discount Tire finally got my rear 235/40/17 size tires in...so I put in some work. It is finally down on the flo and the rears are tuckin a bit. Haven't adjusted the front coilovers yet so there is a 3" gap for now. Tomorrow it goes in for alignment, but what trips me out is what specs are the...

Looks really good! What tire sizes are on the wheels right now? Do you like a lot of wheel stretch on your wheels? Where did you get those brake switch stoppers from? Actually those sizes that I posted are whats actually on there now. I don't like a lot of stretch but wouldn't mind some. I just don...

Did the front rack s14 poly bushings. Was way loose before, now solid as a rock. http://img227.imageshack.us/img227/874/img1289wc.jpg Ok...I took the easy way out and got some used fn01rc's for cheap (17x9 & 17x10, +15 & +12 respectively)...painted the barrels and all, turned out nice. Anyone have ...

Thanks striker, and thank you whoever changed the title of the thread! 8) A little update once more. The front 4 lug hubs/spindles were pulled off a 94 s13 with 122k...never expected to see them like this. Unmolested.. http://img228.imageshack.us/img228/9118/img1039y.jpg Replaced with Ichiba 5 lug ...